Forums
https://www.decware.com/cgi-bin/yabb22/YaBB.pl SUPPORT FORUMS FOR DECWARE SPEAKER PLANS >> WO32 Support Forum >> Opinions on DVC drivers https://www.decware.com/cgi-bin/yabb22/YaBB.pl?num=1134150277 Message started by ILYA on 12/09/05 at 16:44:37 |
Title: Opinions on DVC drivers Post by ILYA on 12/09/05 at 16:44:37 What do you guys think: http://www.audiobahn.com/products/2005Products/woofers/woofers.html Audioibahn AW1006T 10" woofer Dual 4-ohm Voice Coil RMS 900 watts Efficiency 95 dB Xmax +/-19mm Fs 35.2 Hz Freq. Resp. 22Hz-500Hz Qts 0.72 Qes 0.89 Qms 3.93 Vas (Liters) 12 Liters Vas (Cu. Ft.) 0.42 Cu. Ft. Re 3.0 ohms Le 1.3 mH Mmd 245 Grams Sd 0.031 M2 i have a few amps i was going to use (one amp per driver), able to run 300W x2 at 4 ohm and 600W x1 at 8 ohms - would they be a good match? Should i wire the driver's voice coils together for an 8-ohm load, or should i keep each voice coil powered by a separate channel into 4-ohms? |
Title: Some more drivers: Post by ILYA on 12/09/05 at 18:28:19 Audiobahn AWES10P RMS 900 watts Efficiency 90 Fs 30 Hz Freq. Resp. 20Hz-500Hz Qts 0.5 Qes 0.54 Qms 6.99 Vas (Liters) 20.18 Liters Vas (Cu. Ft.) 0.71 Cu. Ft. Re 3.6 ohms DVC Le 3.75 mH Mmd 146.44 Grams Xmax +/-13mm Sd 0.029 Audiobahn AW1000N RMS 600 watts Efficiency 91.1 dB Fs 30.0 Hz Freq. Resp. 23Hz-500Hz Qts 0.41 Qes 0.44 Qms 5.3 Vas (Liters) 23 Liters Vas (Cu. Ft.) 0.80 Cu.Ft. Re 3.2 ohms DVC Le 1.95 mH Mmd 135 grams Xmax +/- 12 mm Sd 0.030 M2 Audiobahn AWIS10P RMS 1500 watts Efficiency 93 dB Freq. Resp. 28Hz - 700Hz Fs 58 Hz Qts 0.475 Qes 0.51 Qms 7.59 Vas (Liters) 7.48 Liters Vas (Cu. Ft.) 0.26 Cu. Ft. Re 1.3 ohms x 4 (QVC) Le 2.09 mH Mmd 113.55 Grams Xmax +/-12.5mm Sd 0.032 M2 MMATS Audio P3.0 10 Power (Wrms) 700 SPL (1W/1M) 92db Fs (Hz.) 29 Re Voice Coil (Ohms) 2 x 4 Vas (Liters) 47.5 Qts .11 Mounting Depth (inches) 5 7/8 Hole Diameter(inches) 11 1/8 Speaker Displacement (cuft.) .12 Power Acoustic FBX-10 600 Watts RMS SPL 90dB Fs: 40.3 Hz 130 oz. magnet 2" BASV voice coil Vas: 0.7 cu.ft. Qms: 5.31 Qes: 0.74 Qts: 0.6472 Xmax: 0.6" Sealed box: .75 cu..ft. Ported box: 1.5 cu..ft. Tuning: 40 Hz. Power Acoustic FUBAR-10W 600 Watts RMS SPL 90 dB Fs: 36.8 Hz 160 oz. magnet 2” BASV voice coil Vas: 0.99 cu.ft. Qms: 4.86 Qes: 0.51 Qts: 0.462 Xmax: 0.4" Sealed box: .75 cu. Ft. Ported box: 1.5 cu.. Ft. Tuning: 40 Hz |
Title: Re: Opinions on DVC drivers Post by vivio on 12/10/05 at 09:05:46 don`t use it . look for that brand on diverend forum . and you will see wy |
Title: Re: Opinions on DVC drivers Post by ILYA on 12/13/05 at 18:30:18 diverend forum ? ? ? and which brand are you refering to? Audiobahn? at this point i am more interested in MMATS actually... |
Title: Re: Opinions on DVC drivers Post by haydenlake on 12/27/05 at 05:54:17 There is no reason to go with a company like audiobahn unless you get em for free or you actually have a bling meter next to your tachometer in your car. There are plenty of subs out there that will sound way better and be just as loud for the money. With that said what are you trying to do with the set up (meaning car or home) and what is your goal. If you just want it go get loud and sound half good a ported box tuned in the upper 30s to mid 40s will do that with more spl than a WO (from what I've been told) but a WO will sound way better but take up far more space and weight. (note I've built two WO's) Other drivers you might want to check out. Anything from Image Dynamics Diamond Audio D6's or 3's if you don't have much $ Anything from Adire Audio Infinity Kappa perfects are great at 100 a pop on ebay Stereo Integrity Sound Splinter are amazing Resonant Engineering are really built well and sound good too -these companies take audio far more seriously than Audiobahn and their products show it. I have no idea about the matts though, prob good for beating on em and getting loud but their rep initially came from SPL cars |
Title: Re: Opinions on DVC drivers Post by ILYA on 12/30/05 at 04:01:45 interested in building 8 of these for pa use - bass reinforcement... max spl is the key... each driver must be capable of 600Wrms at 8-ohms, and have an SPL of at least 90db or more... |
Title: Re: Opinions on DVC drivers Post by Adrian D. on 12/31/05 at 17:52:39 if spl is your goal, go for pa subs. those have much more sensitivity than car subs. you want to build wo32 or wo ? |
Forums » Powered by YaBB 2.2.2! YaBB © 2000-2008. All Rights Reserved. |