Forums
https://www.decware.com/cgi-bin/yabb22/YaBB.pl SUPPORT FORUMS FOR DECWARE SPEAKER PLANS >> Housewrecker Support Forum >> HWK-18 project https://www.decware.com/cgi-bin/yabb22/YaBB.pl?num=1156916438 Message started by Sean on 08/30/06 at 05:40:38 |
Title: HWK-18 project Post by Sean on 08/30/06 at 05:40:38 So, having finally decided that a couple of imperials would take up way too much space, I have decided to build a HWK-18 using two of these EVX-180B drivers: http://www.cameronproaudio.com/pdf/evx180b.pdf#search=%22evx-180b%22 I haven't been happy with the way my HWK-15 was performing (2 Dayton Series II drivers, both magnets in center), ever since I tested it with the two drivers clamshelled in the bottom baffle. The response in that case was much lower, great for HT/LFE but peaking a bit too low for music. With the drivers as they are now, bass is tight and reasonably musical but the extension is not as low. I'm hoping that the HWK-18 with the EV drivers will cover most of the musical requirements, allowing me to switch the HWK-15 back to the clamshell-in-lower-baffle configuration just to cover the bottom octave. With an Fs of 19Hz, the Daytons are pretty well suited to that purpose. |
Title: Re: HWK-18 project Post by shawn_cake on 11/26/06 at 16:35:41 I built an HWK-18 with four JBL 2245H drivers. The bass is very extended. Assuming your HWK-18 is for home use, I would make sure I use drivers with a resonant frequency of 20 Hz or lower. This will ensure you get the DEEP bass response needed in home theater applications. |
Title: Re: HWK-18 project Post by 60ndown on 11/26/06 at 21:32:27 6000 watts continuous ;) call me over when your ready to plug it in please. |
Title: 6000 watts continuous Post by cavenut on 12/17/06 at 00:48:22 What are you going to drive that with??? That would be great with a 1200wpc mono Mcintosh. The problem is the price |
Title: Re: HWK-18 project Post by gildcm on 01/04/07 at 18:13:24 I have two of the EVX-180B in my home theater system. I have each one in a 18" Super Scooper. They are being pushed by a Phonic 3200 amp, running in parallel. So I'm push 2800 watts to them. Playing rock music thru them and I knock pictures off the wall in my living room and can hear them at my next door neighbors house hitting lowes. The speaker is great and I have always wanted to build a HWK-18 for them but never have. Let me know what they sound like. Good luck in building the HWK-18. |
Forums » Powered by YaBB 2.2.2! YaBB © 2000-2008. All Rights Reserved. |