Forums
https://www.decware.com/cgi-bin/yabb22/YaBB.pl SUPPORT FORUMS FOR DECWARE SPEAKER PLANS >> Wicked One Support Forum >> Can Someone Tell Me If These 8's Will Work https://www.decware.com/cgi-bin/yabb22/YaBB.pl?num=1268835324 Message started by only126db on 03/17/10 at 15:15:24 |
Title: Can Someone Tell Me If These 8's Will Work Post by only126db on 03/17/10 at 15:15:24 Ok I am really thinking about running a couple 8's I have, but on the plans page it says to model the driver as a 4th order bp but I've seen on here to model for a sealed enclosure. I've also seen where it's better to use a low fs driver. So before I waste my time and $$ could someone with experience with this enclosure let me know if I can use these drivers? Specs= FS 40hz re 7.73ohm le 6.14mh qts .529 qes .588 qms 5.273 vas .54cu ft - 15.4L 84.4db 1w/m xmax 8mm - .31" rms 200w pk 400w displ .035 recom sealed .3 recom ported .625 thx in advance |
Title: Re: Can Someone Tell Me If These 8's Will Work Post by Steve Deckert on 03/17/10 at 16:33:49 Driver is a waste of time. QTS is too high, and more importantly the efficiency of 84dB is too low. Find something that is 90dB or more. |
Title: Re: Can Someone Tell Me If These 8's Will Work Post by only126db on 03/17/10 at 16:54:57 Ok, Thanks for the speedy reply. |
Forums » Powered by YaBB 2.2.2! YaBB © 2000-2008. All Rights Reserved. |