Forums
https://www.decware.com/cgi-bin/yabb22/YaBB.pl OLDER DECWARE GEAR SUPPORT >> The ZEN TABOO >> CSP2 + Taboo and low efficiency speakers? https://www.decware.com/cgi-bin/yabb22/YaBB.pl?num=1280282641 Message started by markm1111 on 07/28/10 at 03:04:00 |
Title: CSP2 + Taboo and low efficiency speakers? Post by markm1111 on 07/28/10 at 03:04:00 Hi Has anyone tried the CSP2/Taboo combo on lower efficiecny speakers? I know the recommendation is for 90dB or higher, but I have a pair of speakers I love that I don't want to change. At the same time, I would like to try the Taboo with my existing CSP2. My speakers are Lenehan Audio ML-1+R, and the specs are: Frequency response: 50 - 25.000Hz +/- 1.5db Sensitivity: 86dB @ 2.83V/m Impedance: 8 ohms nominal, minimum 6.5 ohms @ 200Hz Recommended amplifier power: 20-200W I won't be listening at very loud levels, and it is in a small room, 2.7m by 3.3m (9x11) Thanks for any input Mark M |
Title: Re: CSP2 + Taboo and low efficiency speakers? Post by Rivieraranch on 07/28/10 at 19:39:17 My TABOO and CSP2 were used with 89db Von Schweikert monitors and the combination was more than adequate. I would go ahead and try. |
Title: Re: CSP2 + Taboo and low efficiency speakers? Post by Lon on 07/29/10 at 11:54:04 Well, freight there and back and a restocking fee can make this a not insignificant trial. 89 db is not the same as 86 db. No offense to anyone here, but I recommend calling Steve, his is the most valuable opinion. He'll know. |
Forums » Powered by YaBB 2.2.2! YaBB © 2000-2008. All Rights Reserved. |