Forums
https://www.decware.com/cgi-bin/yabb22/YaBB.pl SUPPORT FORUMS FOR DECWARE SPEAKER PLANS >> Housewrecker Support Forum >> Anyone scale and use JL Audio 18W6's in a HWK? https://www.decware.com/cgi-bin/yabb22/YaBB.pl?num=1338980545 Message started by spanyerd on 06/06/12 at 12:02:25 |
Title: Anyone scale and use JL Audio 18W6's in a HWK? Post by spanyerd on 06/06/12 at 12:02:25 New to the forum (obviously) and am looking for opinions and help. I bought the plans for the 15" version, but I have four new 18W6's sitting around. They may not be ideal for this application but I'm hoping they'd at least be acceptable. The T/S numbers are below. I would gladly pay for pro plans. Thanks in advance! Fs (free-air resonance): 20.0 Hz Qts (total speaker “Q”): 0.384 Qes (electrical “Q”): 0.402 Qms (mechanical “Q”): 8.740 Vas (equivalent compliance): 9.00 ft3 254.9 liters Xmax (linear excursion one-way): 0.500 in. 12.7 mm Efficiency (1W/1m)*: 88.8 dB Sd (effective piston surface area): 182.6 in2 0.1178m2 Re (DC resistance): 11.04 Ω (in series) Znom (nominal impedance): Dual 6 Ω Pt (continuous thermal power handling): 500 Watts |
Title: Re: Anyone scale and use JL Audio 18W6's in a HWK? Post by Ronnie Richards on 07/11/12 at 12:35:54 Well have you made connections? If yes then please try to tell me.. |
Forums » Powered by YaBB 2.2.2! YaBB © 2000-2008. All Rights Reserved. |