Forums
https://www.decware.com/cgi-bin/yabb22/YaBB.pl AUDIO FORUMS >> General Discussion and Support >> connecting a subwoofer to a Zen se84 https://www.decware.com/cgi-bin/yabb22/YaBB.pl?num=1398348980 Message started by juszat on 04/24/14 at 15:16:20 |
Title: connecting a subwoofer to a Zen se84 Post by juszat on 04/24/14 at 15:16:20 I have a an Omega single driver speaker ( super 3) set up with a superzen SET amp in my bedroom . Late night i usually lower the volume and some of the low frequency suffers . I am thinking about adding an 8 " sealed subwoofer . My question is what would be the best way to connect the sub to the superzen amp ? |
Title: Re: connecting a subwoofer to a Zen se84 Post by deucekazoo on 04/24/14 at 16:11:38 Would that be an 8" powered sub? If yes, then just Y the signal going into your Zen and run it into the sub. It would be better if you had a pre-amp before your Zen, then it can have two outputs, one for your sub and one for your amp. |
Title: Re: connecting a subwoofer to a Zen se84 Post by DBC on 05/03/14 at 14:34:40 Unless you want to invest in a preamp I suggest you select a sub with "Speaker Level" inputs. Connect a second set of speaker cables from your amps Left / Right speaker outputs to the Speaker Level input connections on the sub. I use inexpensive Cat 5 network cable for this connection with very good results in my system. If you really want to improve lower volume listening then I suggest a Mid Bass Module over the Sub only approach. You can get more info here: https://www.decware.com/cgi-bin/yabb22/YaBB.pl?num=1360355711/0#0 |
Forums » Powered by YaBB 2.2.2! YaBB © 2000-2008. All Rights Reserved. |