Forums
https://www.decware.com/cgi-bin/yabb22/YaBB.pl EQUIPMENT FORUMS >> ZP3 / ZMC1,2,3 >> ZP3 & ZMC1 transformer https://www.decware.com/cgi-bin/yabb22/YaBB.pl?num=1398397227 Message started by Dixlon on 04/25/14 at 04:40:27 |
Title: ZP3 & ZMC1 transformer Post by Dixlon on 04/25/14 at 04:40:27 Hello to all, I have a question about ZMC1 transformer. I'm looking to purchase the EMT TSD15 N cartridge. It is classified as a medium output cartridge. The Specs are below: Stylus tip radius (µm) 6 Diamond/saphir Diamond Tracking force (mN) 20-30 Mono/stereo Stereo Impedance 2 X 24 Ohm Output transfer level (mVs/cm) 0,21/channel Frequency response (Hz) 20...30000 Cross talk min. 25 dB FIM max. 0.5% Vertical tracking angle 23° (±3°) Compliance 15 µm/mN Eff. stylus tip mass ca. 1 mg Tone arm connection EMT tone arm Weight (g) 17.5 Will this cartridge work with the ZMC1. I have the ZP3 and my turntable is the Pro-Ject Xtension 12 Turntable. Thanks all for the advice. :) Regards, Kirk |
Title: Re: ZP3 & ZMC1 transformer Post by marky on 04/25/14 at 20:53:03 Dixion, the ZMC1 looks the right one but best to double check. Specifying the cart when ordering will ensure the correct match up. Great choice of cart, lucky ZP3 ! 8-) |
Title: Re: ZP3 & ZMC1 transformer Post by Dixlon on 04/25/14 at 23:46:18 Thanks Marky for your response. I spoke with my local Hi-Fi shop and they said when I have the EMT cart to test it out to see how it sounds. |
Title: Re: ZP3 & ZMC1 transformer Post by marky on 04/28/14 at 10:21:14 I`ve read nothing but good things about EMT gear. The carts have an appeal that I`m very interested in and have tried to locate a JSD at a good price, but as with some of these specialist carts there are only one or two outlets for them, or one that I can find, so no price comparisons. lol it`s easy to be picky when you window shop. Please let us know your impressions. I guess it comes down to the vibe and depth it gives you. |
Forums » Powered by YaBB 2.2.2! YaBB © 2000-2008. All Rights Reserved. |