Forums
https://www.decware.com/cgi-bin/yabb22/YaBB.pl EQUIPMENT FORUMS >> SE34I.6 >> Bias meter goes to max? https://www.decware.com/cgi-bin/yabb22/YaBB.pl?num=1456015149 Message started by hdrider on 02/21/16 at 00:39:09 |
Title: Bias meter goes to max? Post by hdrider on 02/21/16 at 00:39:09 Came home last night and as I walked to the spare room to stash my coat and boots, I opened the audio closet and turned on the Rachael and ZP3 (same thing every night). So about 15 seconds, volume down all the way, I hear a pop out of a speaker so opened the door and the left channel bias meter is pegged. Right channel is at 40 which was normal for these tubes (TAD EL34 cryo'ed). I took them both out and put back the original Tungsol's that Steve shipped the amp with. I have had two pair of the TAD's that I bought from the same vendor and had one in each set fail. I used TAD EL84's in my SE84CS+ for years and loved them. Rachael has been on all day and no problems. Has anyone had a similar issue? I will be emailing the vendor since this set of TAD's is still within the 90 day warranty. Happy listening, Chris. |
Title: Re: Bias meter goes to max? Post by hdrider on 02/29/16 at 21:17:47 Well Ron @ Cryoset received the defective TAD EL 34 last Tuesday, tested it and verified that it would short out after 3 to 5 minutes, send a replacement to me which I rec'd on Friday. Being out of town this weekend I didn't install the TAD EL34 until yesterday, powered it up and it hit the bias point just like to other tube and worked flawlessly all day and night Sunday. Nice to deal with a good vendor like Cryoset Tubes who stands by their products and provides the support when needed. Thanks Lon for the heads up on Ron/Cryoset. I will be buying more from him shortly as I am getting a top of the line Stax Electrostatic earspeakers and tube amp this week (FREE) but I would guess that some new 6FQ7 might be in order. Happy listening, Chris. |
Title: Re: Bias meter goes to max? Post by Lon on 02/29/16 at 21:58:02 Great news Chris! |
Title: Re: Bias meter goes to max? Post by Steve Deckert on 05/08/16 at 04:01:03 You gotta love meters! Kind like fire alarms aren't they? This is also why a grossly oversized power supply (in todays world) is always a good thing. It actually had to work there for a minute during the dead short. Didn't blow a fuse, cook a circuit board, fry a tweeter, or anything serious even under the most extreme condition - a dead short. Thanks for the great post! Steve |
Title: Re: Bias meter goes to max? Post by hdrider on 05/08/16 at 15:32:13 You are correct Steve, fire alarms. Over built, over engineered and SO darn musical these products just release beautiful sound day in and day out. Thank you Steve and Team Decware. Happy listening, Chris. |
Forums » Powered by YaBB 2.2.2! YaBB © 2000-2008. All Rights Reserved. |