Forums
https://www.decware.com/cgi-bin/yabb22/YaBB.pl EQUIPMENT FORUMS >> SE84UFO2 >> How to share two amps with one set of speakers https://www.decware.com/cgi-bin/yabb22/YaBB.pl?num=1510717305 Message started by Hankster on 11/15/17 at 03:41:45 |
Title: How to share two amps with one set of speakers Post by Hankster on 11/15/17 at 03:41:45 Hi, new to the site, but just placed and order for a UFO2. Looking for ideas of how best to share two amps with one set of speakers. Any ideas would be greatly appreciated. Thanks, Hankster |
Title: Re: How to share two amps with one set of speakers Post by ZYGI on 11/16/17 at 02:56:04 Hankster, Welcome to the forum... How about banana plugs for the speaker leads for a quick switch over from one amp to the other. That only works well if the are easily accessible and right next to each other. Or a switch box used in reverse. Zygi |
Title: Re: How to share two amps with one set of speakers Post by Milesian on 05/09/18 at 15:17:42 I’m using a Beresford TC-7210 with my UFO2. In the morning with coffee I use the pre-out on my Naim Atom to feed the Zen which in turn feeds the speakers. For evening listening I switch the speakers to the Naim bypassing the Zen. This is a nice switch. Heavy duty binding posts and resistor loading on the unused outputs in case you forget to turn the Zen off when disconnecting. Great shipping and a personal communication from the designer himself. Came in around $100. |
Title: Re: How to share two amps with one set of speakers Post by Hankster on 03/30/19 at 03:04:21 Hey, thanks for the information I'll look into that for my setup. |
Title: Re: How to share two amps with one set of speakers Post by alper_yilmaz on 03/30/19 at 16:33:37 Hi Milesian, Have you noticed any sound degradation after putting the Beresford into your signal chain? Best, Alper |
Forums » Powered by YaBB 2.2.2! YaBB © 2000-2008. All Rights Reserved. |