Forums
https://www.decware.com/cgi-bin/yabb22/YaBB.pl EQUIPMENT FORUMS >> SE84UFO >> Trouble in Paradise https://www.decware.com/cgi-bin/yabb22/YaBB.pl?num=1571487323 Message started by Melvin on 10/19/19 at 13:15:23 |
Title: Trouble in Paradise Post by Melvin on 10/19/19 at 13:15:23 Hey guys, I’m hoping for some insight and perhaps advice concerning my SE84UFO. As of late it simply stops working after a short while. I hear a slight pop or something like it and then .. no sound. This has happened a few times now, after several hours of play and after only a few minutes as well. I’ve checked all other components (including modem and router), after which, I swapped the amp out with another. The system works as expected after the swap. The tubes were replaced 2 months ago, are all working, and seated properly. I didn’t notice any odd behavior or sound prior to this either. I’m perplexed. I haven’t heard back from Steve yet so I thought I’d ask the community. Any clues? Thank you gentlemen. |
Title: Re: Trouble in Paradise Post by Geno on 10/19/19 at 15:26:18 Melvin, I’m sorry you’re having issues. First, make sure you have a good seating of the power cord. Mine was a little loose once and it caused it to go off and on. Then, I’d swap out 1 tube at a time just to make sure that you don’t have a faulty tube. Next, there are 3 internal fuses. It won’t hurt to just swap those out. Next would be a talk with Steve. Hope you get it figured out soon. |
Title: Re: Trouble in Paradise Post by Melvin on 10/20/19 at 03:08:08 Thanks Geno. I reinserted the amp the same thing is occurring. I need to open it up I suppose, which is nerve-wrecking for me. I hope to speak to Steve soon as well. Fortunately, I have plenty of gear in storage to keep the music playing but I already miss my SE84UFO. |
Title: Re: Trouble in Paradise Post by Geno on 10/20/19 at 21:15:33 Nothing to opening it up. Just a bunch of screws to take out. I’ve had to do it 4 or 5 times. Simple. |
Title: Re: Trouble in Paradise Post by Melvin on 10/22/19 at 00:38:46 Just a follow-up .. it was the power tube(s). Paradise has been restored! BTW, I'm such a newbie and instead of replacing the power tubes 1 at a time I replaced both, so I don't honestly know if it was 1 or both tubes. I will check at a later date. Thanks again for your help Geno. |
Title: Re: Trouble in Paradise Post by Geno on 10/22/19 at 02:32:30 That’s great, Melvin. Glad you’re back in business! |
Forums » Powered by YaBB 2.2.2! YaBB © 2000-2008. All Rights Reserved. |