Forums
https://www.decware.com/cgi-bin/yabb22/YaBB.pl EQUIPMENT FORUMS >> SE84UFO >> Clipping/heavy distortion with SE84UFO https://www.decware.com/cgi-bin/yabb22/YaBB.pl?num=1589477766 Message started by hells on 05/14/20 at 18:36:06 |
Title: Clipping/heavy distortion with SE84UFO Post by hells on 05/14/20 at 18:36:06 Hey guys! So I have been using a new set of solid state gear I received a couple weeks ago. A Freya S and an Aegir. While wonderful I wanted to see if the Freya S's additional gain (in 4x mode, so 12db more) would give my little SE84UFO a kick in the pants to up the volume on an already awesome sounding amplifier. Instead I get heavy distortion on anything past the half way mark on the amp's volume dial. So in 4x mode on the Freya, I have the SE84UFO at half way. I can turn the Freya all the way up, and music remains nice. Just quiet. So if I turn up the SE84UFO anywhere past 1/2, the amp starts clipping super hard. Is this expected? I guess I assumed by using the Freya I could overcome the gain that the 2 watts gets me on some recordings. But it's having the opposite effect ;D EDIT: I should have added that I've tried new tubes in this, all but the Rectifier tube. These tubes shouldn't have had more than 6 months usage at like 5-8 hours a day on them. As I then swapped to my SE84UFO25 that I recently sold. I'd imagine the rectifier would have plenty of juice left? |
Title: Re: Clipping/heavy distortion with SE84UFO Post by Archie on 05/15/20 at 00:31:02 If I'm understanding your issue correctly I might be able to help. The SE84UFO won't necessarily get louder by putting more voltage into it. If the amp comes up to full power with a 2 volt input, anything over 2 volts will either clip/distort or keep you from turning the volume knob up all the way. You might get more density to the music though. Someone else can give a good description of "riding the gain." |
Title: Re: Clipping/heavy distortion with SE84UFO Post by hells on 05/15/20 at 03:51:49 I think that’s exactly what’s happening, I just wasn’t understanding how two gain sources worked. I did some more reading and I think I understand it all thanks! |
Forums » Powered by YaBB 2.2.2! YaBB © 2000-2008. All Rights Reserved. |