Forums
https://www.decware.com/cgi-bin/yabb22/YaBB.pl EQUIPMENT FORUMS >> SE84UFO >> Switch Selection for Speakers https://www.decware.com/cgi-bin/yabb22/YaBB.pl?num=1612351247 Message started by jcmusic on 02/03/21 at 11:20:47 |
Title: Switch Selection for Speakers Post by jcmusic on 02/03/21 at 11:20:47 Ok so you have two switches are the two switches suppose to be in the same position creating two different sounds, or can they be in different positions creating four different sounds? |
Title: Re: Switch Selection for Speakers Post by Lon on 02/03/21 at 13:28:13 I would use both switches in the same position . . . that way each speaker is fed the same "signal" . . . . |
Title: Re: Switch Selection for Speakers Post by CAJames on 02/03/21 at 15:04:58 There is certainly no harm in having the switches in different positions but I agree with Lon that it makes sense to choose one or the other. I'll say however in my system (that can resolve significant differences between fuses and cables) I hear no difference changing the impedance switch. |
Title: Re: Switch Selection for Speakers Post by Lin on 02/03/21 at 16:40:32 Do you use the amp to drive just the tweeters? |
Title: Re: Switch Selection for Speakers Post by jcmusic on 02/03/21 at 23:22:33 No I use the amp to drive just the mid drivers. I do hear a difference when I switch them and I thought the same that both should be in the same position, I just wanted to be sure thanks guys... |
Forums » Powered by YaBB 2.2.2! YaBB © 2000-2008. All Rights Reserved. |