Forums
https://www.decware.com/cgi-bin/yabb22/YaBB.pl EQUIPMENT FORUMS >> ZP3 / ZMC1,2,3 >> ZP3 issues I had corrected https://www.decware.com/cgi-bin/yabb22/YaBB.pl?num=1710731596 Message started by back2vinyl on 03/18/24 at 04:13:16 |
Title: ZP3 issues I had corrected Post by back2vinyl on 03/18/24 at 04:13:16 A awhile back I posted about my ZP3 intermittently acting up. Low volume, no volume, one channel volume..All this was corrected replacing all tubes! I was wasting my time switching out individual tubes in all positions, some new , some not. Save yourself the headache and just replace all tubes. You can thank me later Looking for a Z stage if anyone has one |
Title: Re: ZP3 issues I had corrected Post by Dominick on 06/22/24 at 03:19:35 So I just ran into this issue tonight. I noticed that my right channel was a lot lower in volume than the left. I just acquired a used ZP3 last month, and was using the tubes that came with the unit….which I knew were old. When I switched over to digital, there was no issues with the loudness of each channel with my SE84C+ amps bridged as monos. So needless to say, I have to replace the front 3 tubes tomorrow. Dom |
Title: Re: ZP3 issues I had corrected Post by back2vinyl on 07/05/24 at 17:37:15 id replace the entire set with the stock tubes from Declare..and call it a day. |
Forums » Powered by YaBB 2.2.2! YaBB © 2000-2008. All Rights Reserved. |