Forums - Print Page

Forums
https://www.decware.com/cgi-bin/yabb22/YaBB.pl
AUDIO FORUMS >> General Discussion and Support >> Trouble with my ZP3
https://www.decware.com/cgi-bin/yabb22/YaBB.pl?num=1716259879

Message started by Cornbread on 05/21/24 at 03:51:19

Title: Trouble with my ZP3
Post by Cornbread on 05/21/24 at 03:51:19

I Turned on my ZP3 and immediately the rectifier tube lit up with a bright flash of white light. I checked the fuse and the fuse glass was black. Next I changed the rectifier tube and replaced the fuse. When I turned it on again I had the same result. A flash of white light and the new fuse blown and blackened. Any suggestions would be greatly appreciated.

Title: Re: Trouble with my ZP3
Post by CAJames on 05/21/24 at 04:06:12

Once is an anomaly, twice is a trend. You can try replacing the fuse again, and starting up the amp without the rectifier, and see if the other tubes still light up. But I'd talk to Steve ASAP.