Forums - Print Page

Forums
https://www.decware.com/cgi-bin/yabb22/YaBB.pl
Audio Forums >> Frequently Asked Questions >> zkit1 from 120V to 240V
https://www.decware.com/cgi-bin/yabb22/YaBB.pl?num=1733676522

Message started by goso64 on 12/08/24 at 16:48:42

Title: zkit1 from 120V to 240V
Post by goso64 on 12/08/24 at 16:48:42

Hello,

I recently moved from US to EU so I am upgrading my power transformer from Edcor XPWR107-120 (120V) to Encore XPWR008-240 (240V).

The 240V transformer has an extra set of leads (yellow, 5V, 3A). I don't think they are needed in the circuit.

If they are not needed, how to I "tie the down" so they don't cause any trouble in my amp?

If they are needed, please let me know what to connect them to.

Thanks in advance for your comments and support.

Title: Re: zkit1 from 120V to 240V
Post by CAJames on 12/08/24 at 17:47:07

The 5V tap is for a rectifier which you don't need. So I'd shrink wrap the ends then stash the wires out of the way.

Title: Re: zkit1 from 120V to 240V
Post by goso64 on 12/08/24 at 23:03:47

Thanks for the reply. [smiley=icqlite20.png]