I am still Building My Wo32.
The project was put on hold because I just had
to finish My 4 year old Panhead chopper project!
Now that the Bike is completed, I am back at the WO
project. I have all the MDF cut and ready to nail N Glue.
But this weekend I am heading south of the border to Baja
for some Lip Pullin'
I am building the Sub at a friends Recording studio/Cabinet
shop. once it is done We will bring it in to the studio for a
frequency test and I will post the results.
I am first going to try some Klipsch 10" Aliminum coned
woofs. I am not real confident these are going to work
in this box but we'll see. I may try some Peerless Or some
Vifa's later on.
I may end up using the ACEi SOS (Subwoofer Optimzer System) cost: about $250.00
This unit uses a mic that plugs onto the SOS & identifies
room resonances & automatically adjusts filter parameters
to integrate the sub to the room.
The result is a flatter frequency response, lower extention,
& sound clarity.
Crossover is a Wellborne Reveille electronic 2-way,
with low pass at 80HZ.
Each 10" Driver will have It's own Amplifier
2) NAD 2155 Amps, Bridged Mono @250 watts each.
My goal is to have it tight & flat to 25HZ.
I Love good tight Bass & a killer midrange. The highs are not
as critical to Me. I have Killer Midrange thanks to Ed's Horns
& Decware amplification.
& Now I am hoping this WO Sub will do the deed.
I will give a full report after It's all dialed in to my listening room