What do you guys think:
http://www.audiobahn.com/products/2005Products/woofers/woofers.htmlAudioibahn AW1006T 10" woofer
Dual 4-ohm Voice Coil
RMS 900 watts
Efficiency 95 dB
Xmax +/-19mm
Fs 35.2 Hz
Freq. Resp. 22Hz-500Hz
Qts 0.72
Qes 0.89
Qms 3.93
Vas (Liters) 12 Liters
Vas (Cu. Ft.) 0.42 Cu. Ft.
Re 3.0 ohms
Le 1.3 mH
Mmd 245 Grams
Sd 0.031 M2
i have a few amps i was going to use (one amp per driver), able to run 300W x2 at 4 ohm and 600W x1 at 8 ohms - would they be a good match? Should i wire the driver's voice coils together for an 8-ohm load, or should i keep each voice coil powered by a separate channel into 4-ohms?