I am considering building a HWK15 for a musical instrument application, and I'd like to get some thoughts on what drivers to use and how to load it. I'll be using it to drive low frequency organ tone down to 16hz. If the HWK works for this application, it would potentially be used in large rooms (auditoriums, churches, theatres etc.), but also in living room environments, where it would need to be less aggressive to keep from cracking the walls.
![Smiley Smiley](https://www.decware.com/yabbfiles/Templates/Forum/default/smiley.gif)
I want it to really move some air in situations where I need it, and be tolerable when I'm practicing at home. I also don't want it to sound "boomy" like the low riders at the mall. Clean, tight bass is what I'm after.
I had thought of building a quad loaded HWK15 with 4 Dayton ST385-8 15" Series II Woofers, wiring them in parallel, resulting in a 2 ohm load. I would feed them with a bridged 1200w amp. Would there be a better way to set this up (different drivers, series wiring, fewer drivers?)
Thanks for your input!
Terry