bayrat
Ex Member
|
Well, I built the DBK212 a couple of months ago. I put in a 2 12's that were really really on the cheap side. I had asked for input on the comparison of 1 DB10 with a decent sub to the DBK212 with 2 cheasy subs. I finaly put the speaker to work. I ended up using with a plate amp rated at 135 watts at 8 ohms. I am not sure of the rating on the vioce coils on the 12s but the amp plays them wired in parallel. As for the sound, I wanted to have some extra low end when listening to music at low levels due to the WAF. All I can say is jeeez, this thing performs. I have 2 Infinity SM150s for my stereo. These have 2 15s but I believe the low end of the frequency response is some where around 40. The DBK212 goes well below that at low volume. I have to tweak the volume on the plate amp to keep it down. Its only been a week or so, and I cant wait to get the house to myself to crank this thing up. Even with the cheap plate amp, the cheesey speakers, this thing really performs well. And to think I was going to go out and buy one of those high dollar subs at Best Buy. I have built several of Decware boxes, the HW, DB10, the Wedge, and now the DBK212, and all of the boxes have surpassed my expectations. So now I think I am ready for the WO, it just seems so complicated with all the angles. But after the performance of the rest of the boxes, this one has to be good too. I guess I am going to have to post some pics one of these days.
|