Hello all.. long time forum user, looks like my old account went away, but I am BACK in action.
Question about some cheapo speakers I use in my shop. They are some old floor speakers that I want to build a new cabinet for, that will sit between the studs of the wall. The shop wall isn't like a house wall, so I can't do in-walls on a plate, it has to be a full enclosure.
My question is about the old enclosure. It has some weird setup and a HUGE port in the back. Does this port seem excessive for what this is? The enclosures have a 10", 5".
With the new enclosures do I need to mock the old design, or go a different route. I know absolutely nothing about the drivers. My feeling is they are too cheap to even worry about much, but I want to make these sound as good as possible. Sealed be better than ported?
I have no specs on these speakers.
![](http://dl.getdropbox.com/u/324658/shop/shopspeak/IMAG0060.jpg)
Port Width
![](http://dl.getdropbox.com/u/324658/shop/shopspeak/IMAG0061.jpg)
Port Depth
![](http://dl.getdropbox.com/u/324658/shop/shopspeak/IMAG0062.jpg)
The 10"
![](http://dl.getdropbox.com/u/324658/shop/shopspeak/IMAG0063.jpg)
Old Box
![](http://dl.getdropbox.com/u/324658/shop/shopspeak/IMAG0064.jpg)
Mid
![](http://dl.getdropbox.com/u/324658/shop/shopspeak/IMAG0065.jpg)
High