Hello;
I installed a JBL Control 1 as center channel in my H.T. The Marantz receiver marks minimal impedance from 6 to 16ohms. and the Control 1 has a nominal impedance of 4, First I thought it's only 2 ohms under specs and later I found the impedance curve of the speaker wich ilustrates a greater demand of power below 100hz.(10ohm)
The center channel is "cut" at 100hz in the receiver set up, so it will never reach the point where low freq's demand 4 ohms right? (55hz)
Hope someone can help me.
Thanks
http://www.jblpro.com/pub/obsolete/Control_1at.pdf