funch
|
I have a CSP2+/TabooII combo and am confused by the inputs on the Taboo. According to the manual, the outer inputs are used to connect directly to a source. The inner inputs are to be used with a preamp, and should bypass the volume pot. It seems, however, that both of the inputs on my Taboo go through the pot. Was mine wired incorrectly? The way mine works seems to make having two sets of inputs redundant.
I just checked from the preamp input RCA to the input pin of the input tube, and each channel shows 1KR. If I check from the source input RCA to input pin, with the pot all the way down, it starts at around 100KR and drops to zero as I turn the pot 'up'. So it all checks out electrically. Now I'm more confused.
|