Anthonyinnz
|
Hi! First post ever. New to Decware and want to try building this point to point. The 6p15p's look interesting : ) Looking at the schematic (revision 3/10/19) and got concerned as to the pinouts suggested for the power supply and outputs for the 6p15p on the schematic: 2/7 on the filaments should rather be 4/5? And, on the 6p15p pins 6/8 are not connected, but theyre connected on the schematic...so, should 6 on the schematic in fact be pin 7? And, should 8 be pin 9? Any help appreciated : )
|