Forums - ZP3 issues I had corrected

Welcome, Guest. Please Login or Register

06/27/24 at 22:08:00

Most recent 50 posts

Forums › EQUIPMENT FORUMS › ZP3 / ZMC1,2,3

‹ Previous topic | Next topic ›

Pages: 1

ZP3 issues I had corrected (Read 218 times)

back2vinyl

Senior Member

Posts: 64

ZP3 issues I had corrected
03/18/24 at 04:13:16

A awhile back I posted about my ZP3 intermittently acting up. Low volume, no volume, one channel volume..All this was corrected replacing all tubes!

I was wasting my time switching out individual tubes in all positions, some new , some not. Save yourself the headache and just replace all tubes.

You can thank me later

Looking for a Z stage if anyone has one

IP Logged

Dominick

Seasoned Member

Still like that old
time Rock and Roll!!

Posts: 1237

Re: ZP3 issues I had corrected
Reply #1 - 06/22/24 at 03:19:35

So I just ran into this issue tonight. I noticed that my right channel was a lot lower in volume than the left. I just acquired a used ZP3 last month, and was using the tubes that came with the unit….which I knew were old. When I switched over to digital, there was no issues with the loudness of each channel with my SE84C+ amps bridged as monos. So needless to say, I have to replace the front 3 tubes tomorrow.

Dom

Rasp. Pi 4 [Roon], Schiit Bifrost True Multibit DAC, ZBIT, ZROCK2, My Audio Cables Ultra Silver+, ZSB, CSP2+ 25th, DAG Cables, DHC1, Torii MKIV 25th /2 White Zen SE84C+ 25th mono’s, Rega P2 Turntable, White top ZP3, Velodyne Dual Firing Sub, ERR’s [Bubbinga Wood]

IP Logged

Pages: 1

Forums › EQUIPMENT FORUMS › ZP3 / ZMC1,2,3

‹ Previous topic | Next topic ›

UPLOAD IMAGES HERE