Welcome, Guest. Please Login or Register
Decware Audio Forums
01/15/25 at 09:34:44 



Most recent 50 posts

Pages: 1
Send Topic Print
EMIA Autoformer + Decware Synergy? (Read 550 times)
HiFi Bri
Senior Member
***




Posts: 78
EMIA Autoformer + Decware Synergy?
08/15/24 at 16:13:01
 
I posted this in a reply on another thread but perhaps the topic warrants it's own thread.

I'm considering a non-Decware preamplifier to use with my UFO25 and have been toying around with purusing a more unconventional path than adding a tube preamp. Currently, I have to turn my amp up to 75% volume to fill the room with music, which isn't a problem, but has left me wondering if I'd benefit from more gain. After reading some glowing reviews, I became curious about the EMIA autoformer.

I emailed Dave Slagle about the possibility of adding the EMIA remote autoformer - specifically about the level of gain it brings and if he thinks it would provide me some ability to "ride the gain" as we say around here.

His response was that he felt the autoformers would work but may not give the improvement in sound that 12+dB of attenuation would give.

This has me considering alternative paths, such as:

1. adding a ZSTAGE to my system for a bit more gain, and using this along side the autoformer.
2. switching gears to a high quality tube preamp like the LTA Microzotl

For those of you who have experienced the EMIA, do you have any insights to share?
Back to top
 
 

Rega P10 | Aphelion 2 |Darlington Labs MP8B + SU-7 | ZRock2 w 25th Ann | SE84UFO25 w/ Attenuators | Decware I/Cs and Pwr Cbls | ZSTYX Speaker Cbls |Omega Alnico Towers | x2 Omega Deep Hemp Subwoofers | Butcherblock Acoustics RigidRack
  IP Logged
bloodlemons
Seasoned Member
****




Posts: 335
Re: EMIA Autoformer + Decware Synergy?
Reply #1 - 08/25/24 at 17:59:23
 
I haven't tried the autoformer, but I have used a ZSTAGE with my ZMA and it did what I believe you're trying to achieve. I'd be surprised if it didn't scratch your itch with or without an autoformer.

EDIT: I just looked up EMIA Remote Autoformer. I can see how that level of control from the listening position would be very tempting...

EDIT 2: Oh! That is not cheap!

EDIT 3: It seems like if you're going for an EMIA product, you'd want the Line Stage. But... these prices are insane. I'm sure it's very good stuff, but...
Back to top
 
 

Thorens TD 125 Mk II w/Reed 3P arm & Benz Micro Ebony cart; Transcriptors Skeleton w/Vestigal Arm & ZYX Ultimate Exceed Airy cart or Grado TLZ; ZP3; CSP3; ZMA; ZSB; Lightspeed Attenuator; Space Tech Labs STR 1004 & 104; Sorcer X4+; SDFBs; Graphene Sluggos in all
  IP Logged
Tony Adams
Verified Member
**




Posts: 25
Re: EMIA Autoformer + Decware Synergy?
Reply #2 - 11/25/24 at 03:30:11
 
If you value transparency and minimal signal degradation, the EMIA could be a great choice. If you prioritize gain and a more tube-like sound, a tube preamp like the LTA Microzotl might be a better fit. Incredibox Colorbox Mustard
Back to top
 
 
  IP Logged
Pages: 1
Send Topic Print