Welcome, Guest. Please Login or Register
Decware Audio Forums
11/12/24 at 22:20:24 




Most recent 50 posts

Pages: 1
Send Topic Print
Siemens CCA / Lorenz PCC88 - good match for UFO25? (Read 621 times)
milkplus
Verified Member
**




Posts: 22
Siemens CCA / Lorenz PCC88 - good match for UFO25?
10/07/24 at 22:31:17
 

Have stumbled across (what I think is...) a good deal locally for a Siemens CCA and Lorenz PCC88 at around €200. Both have relatively low hours on them. I'm unfamiliar with either tube, but my reading on them (particularly the CCA) seems to suggest that they are very.good indeed.

Just wondering if anyone out there had used either of these tubes in their UFO25 and what insights you might be able to share?
Back to top
 
 

Rega RP8 (w/ TNG-Spinner platter + isolation feet) -> Hegel V10 -> ZRock2 -> UFO25 -> Omega Junior 8 XRS

Lyngdorf TDAI 1120 -> Omega Compact Alnico Monitors

Woo Audio Wa7 Fireflies --> Hifiman Arya Organic | Sennheiser HD800
  IP Logged
CAJames
Seasoned Member
****


"I've run every
red light on memory
lane."

Posts: 2136
Re: Siemens CCA / Lorenz PCC88 - good match for UFO25?
Reply #1 - 10/07/24 at 22:49:46
 
I haven't used either tube, but am familiar with their reputations, especially the CCa.  But my experience with 6922/E88CC tubes (like the CCa) has not been good on my UFO25. They were some of my favorite input tubes on my UFOs, but for whatever reason I haven't had good results with them on the 25s. PCC88s match much better for me, and in your position would consider the Lorenz before the Siemens.  FWIW €200 seems like a lot for the PCC88, but maybe that is where the market is these days.

Back to top
 
 

[FOOBAR2000 | Jay's CDT2 MRK3] -> Denafrips Terminator 2 + Gaia
Sumiko Pearwood -> Mapleknoll Athena -> Luxman SUT -> Mapletree Phono 3E
STR-1002 -> Woo WA22 -> 2x UFO25s, balanced monos
Omega SAM , Hifiman Arya, Audeze LCD-XC
  IP Logged
milkplus
Verified Member
**




Posts: 22
Re: Siemens CCA / Lorenz PCC88 - good match for UFO25?
Reply #2 - 10/08/24 at 05:42:55
 
Thanks for the info... And potentially saving me some cash haha. I'm curious about the CCa but not 200 euros worth if it's not going to be a definite improvement. Luckily, the guy wants far less (around 20€) for the pCC so that seems like a no-brainer to take a punt on.

He actually has the following pCCs::
Philips pcc88
Telefunken pcc88
Mullard pcc88
Loranz pcc88

Would you have a preference in this situation? Or maybe worth springing for all of them to see what works?
Back to top
 
 

Rega RP8 (w/ TNG-Spinner platter + isolation feet) -> Hegel V10 -> ZRock2 -> UFO25 -> Omega Junior 8 XRS

Lyngdorf TDAI 1120 -> Omega Compact Alnico Monitors

Woo Audio Wa7 Fireflies --> Hifiman Arya Organic | Sennheiser HD800
  IP Logged
CAJames
Seasoned Member
****


"I've run every
red light on memory
lane."

Posts: 2136
Re: Siemens CCA / Lorenz PCC88 - good match for UFO25?
Reply #3 - 10/08/24 at 15:34:08
 
Quote:
Posted by: milkplus      Posted on: Yesterday at 21:42:55

...
Philips pcc88
Telefunken pcc88
Mullard pcc88
Loranz pcc88

Would you have a preference in this situation? Or maybe worth springing for all of them to see what works?


Yes . I have the other 3 and like them a lot. The Mullard is on the warm side with more emphasis on the low frequencies. The TFK is my favorite, super transparent and linear from top to bottom. The Philips is in between, a little warmer than TFK and a little more linear than the Mullard. I would get them all, then report back on what you think.
Back to top
 
 

[FOOBAR2000 | Jay's CDT2 MRK3] -> Denafrips Terminator 2 + Gaia
Sumiko Pearwood -> Mapleknoll Athena -> Luxman SUT -> Mapletree Phono 3E
STR-1002 -> Woo WA22 -> 2x UFO25s, balanced monos
Omega SAM , Hifiman Arya, Audeze LCD-XC
  IP Logged
milkplus
Verified Member
**




Posts: 22
Re: Siemens CCA / Lorenz PCC88 - good match for UFO25?
Reply #4 - 10/08/24 at 16:10:32
 
Ha, sounds like a plan. Went ahead and got all four and he threw in a pair of Ei EL84s for 180€ all up. I think that's seems fair. Looking forward to getting them all in and taking a listen. Thanks for the input!
Back to top
 
 

Rega RP8 (w/ TNG-Spinner platter + isolation feet) -> Hegel V10 -> ZRock2 -> UFO25 -> Omega Junior 8 XRS

Lyngdorf TDAI 1120 -> Omega Compact Alnico Monitors

Woo Audio Wa7 Fireflies --> Hifiman Arya Organic | Sennheiser HD800
  IP Logged
milkplus
Verified Member
**




Posts: 22
Re: Siemens CCA / Lorenz PCC88 - good match for UFO25?
Reply #5 - 10/11/24 at 19:45:44
 
Ok. Tubes arrived earlier today and popped in the Telefunken PCC88 first based on your description, CAJames, and to be perfectly honest I'm a little in shock.

There is a considerable sonic improvement compared to the stock tube from Decware. It's like I'm actually getting that "holographic" sound that people always bang on about. Part of me wants to attribute it to "new gear syndrome" but I mean everything sounds fantastic so it's difficult to deny that something is going on. This is the first time I've rolled an input tube on my UFO25 and frankly I'm surprised to see it make such a difference. These PCC88s are a bit of a revelation it seems.

Curious to try out one of the other three tubes but I'm enjoying this TF (paired with a RCA Globe Type 80 and Cryotone EL84s) so much that I may just stick with it for now. Why ruin a good thing? Haha
Back to top
 
 

Rega RP8 (w/ TNG-Spinner platter + isolation feet) -> Hegel V10 -> ZRock2 -> UFO25 -> Omega Junior 8 XRS

Lyngdorf TDAI 1120 -> Omega Compact Alnico Monitors

Woo Audio Wa7 Fireflies --> Hifiman Arya Organic | Sennheiser HD800
  IP Logged
CAJames
Seasoned Member
****


"I've run every
red light on memory
lane."

Posts: 2136
Re: Siemens CCA / Lorenz PCC88 - good match for UFO25?
Reply #6 - 10/12/24 at 01:50:36
 


Glad the Telefunken is working out for you. One of mine (I need them in pairs) went bad not long after I got my UFO25s, but I have so many other input tubes I haven't been motivated to look for another pair. In fact I put in some Mullard PCC88s after our discussion a few days ago, and they are sounding really good.

One thing that I don't see talked about very much is the bias switch. I think it is important to try both positions with a new tube, it can make a big difference to the sound. But it also changes the volume so you have to make the adjustment otherwise it isn't a fair comparison.

Nothing wrong with enjoying the sound you have now, but at some point I'll be interested in hearing what you think of the other tubes.
Back to top
 
 

[FOOBAR2000 | Jay's CDT2 MRK3] -> Denafrips Terminator 2 + Gaia
Sumiko Pearwood -> Mapleknoll Athena -> Luxman SUT -> Mapletree Phono 3E
STR-1002 -> Woo WA22 -> 2x UFO25s, balanced monos
Omega SAM , Hifiman Arya, Audeze LCD-XC
  IP Logged
milkplus
Verified Member
**




Posts: 22
Re: Siemens CCA / Lorenz PCC88 - good match for UFO25?
Reply #7 - 10/12/24 at 05:39:46
 
It's funny that you mention the bias switch. I've been going through a bit of a crisis of faith with it recently haha. Since getting the amp a few months ago (and also with my previous UFO2.1) I always preferred it set to the Low position. However I recently removed the isolation feet from my speakers (Omega Junior 8 XRS) due to WAF and it's like everything significantly dipped in volume as a result.

So, rather than just turning up the volume (which I tried but found that I needed to push it much higher than I liked) I flipped the bias switch to High and found that it improved things significantly - more punch, dynamics and presence in the music. No matter what tubes I rolled it didn't make a difference. I also thought it perhaps might have something to do with the amp seasoning but that seems a little implausible as it's not something I ever experience faith my UFO2.1.

I'm surprised that the isolation feet really made such a difference in this situation. In fact, I have a different, more discrete, set arriving next week and am curious to see what result it will have.

Btw, and please excuse my ignorance, but is it the input tube that most affects the bias switch on the amp? Or is it any tube?
Back to top
 
 

Rega RP8 (w/ TNG-Spinner platter + isolation feet) -> Hegel V10 -> ZRock2 -> UFO25 -> Omega Junior 8 XRS

Lyngdorf TDAI 1120 -> Omega Compact Alnico Monitors

Woo Audio Wa7 Fireflies --> Hifiman Arya Organic | Sennheiser HD800
  IP Logged
Lon
Seasoned Member
****


"Love without
guts is
worthless!"
Philip K. Dick

Posts: 24742
Re: Siemens CCA / Lorenz PCC88 - good match for UFO25?
Reply #8 - 10/12/24 at 09:54:25
 
The volume "difference" I would suspect is because of the tweeter height change relative to the floor. It will be another change likely with different footers if there is a difference in height when applied.

The bias switch is for the input tube alone. But a change anywhere changes everywhere in these transparent components.
Back to top
 
 

HR-1,ZBIT,ZROCK2,SEWE300B,CSP3-25mod; Rega RP3 all GrooveTracer mods;PSAudio:PST+DSD, DAC Mk II, P15,NPC,PowerBases,AC-12 pwr cbls, Reference spkrcbls; Mapleshade SamsonV3; VooDoo:Cremona+Amati interconnects, IsoPods; headphones: Sennheiser HD800S,ZMF Ori,Oppo PM1
  IP Logged
CAJames
Seasoned Member
****


"I've run every
red light on memory
lane."

Posts: 2136
Re: Siemens CCA / Lorenz PCC88 - good match for UFO25?
Reply #9 - 10/12/24 at 16:19:25
 
Just to follow up on what Lon said, when you change the height of your speakers you also change the frequency response at your listening position. The volume may be a little lower as well, but I think it mostly "sounds" lower because you are hearing a different mix of high/mid/low frequencies, and I suspect you are getting less bass then you were with the footers. You kind of proved that by turning up the volume but not liking the sound. So when you flipped the bias switch you also changed the frequency response of the input tube, probably in a way that compensated for the change in your speaker placement.
Back to top
 
 

[FOOBAR2000 | Jay's CDT2 MRK3] -> Denafrips Terminator 2 + Gaia
Sumiko Pearwood -> Mapleknoll Athena -> Luxman SUT -> Mapletree Phono 3E
STR-1002 -> Woo WA22 -> 2x UFO25s, balanced monos
Omega SAM , Hifiman Arya, Audeze LCD-XC
  IP Logged
CAJames
Seasoned Member
****


"I've run every
red light on memory
lane."

Posts: 2136
Re: Siemens CCA / Lorenz PCC88 - good match for UFO25?
Reply #10 - 10/12/24 at 16:38:11
 
One other note, if you are curious about E88CC type tubes, esp. German tubes like Siemens or TFK I'd suggest you look for a Tesla E88CC, either gold or silver/rhodium pin. Tesla has a similar sound, and while they cost more than they did a few years ago they are more reasonably priced than the famous makers. If you like it then might consider something like the CCa if you have a couple hundred euros burning a hole in your pocket.
Back to top
 
 

[FOOBAR2000 | Jay's CDT2 MRK3] -> Denafrips Terminator 2 + Gaia
Sumiko Pearwood -> Mapleknoll Athena -> Luxman SUT -> Mapletree Phono 3E
STR-1002 -> Woo WA22 -> 2x UFO25s, balanced monos
Omega SAM , Hifiman Arya, Audeze LCD-XC
  IP Logged
milkplus
Verified Member
**




Posts: 22
Re: Siemens CCA / Lorenz PCC88 - good match for UFO25?
Reply #11 - 10/12/24 at 19:50:07
 
Thanks gents. Of course the height of the speaker would affect volume, can't believe I didn't think of that! Will be interesting to see when these new footers come in next week if things will go back to how they used to be. Not sure of they're the same height as the ones the boss disapproved of, but I imagine they're still taller than the stock Omega spikes (which do in fact look lovely but I feel just don't gel with my suspended wooden floor very well).

Thanks for the tip on the Tesla E88CC - I see there someone here in Norway selling a matched pair for ~160€. Not sure if that's a fair price? Might be a little rich for my wallet right now after having just spent a tidy sum on all those PCC88s...

Just for fun I rolled in my EL822s to replace to see how they managed with the TF PCC88. Sounds decent but isn't wowing me quite as much as the Cryotone EL84s did. I'll give it an couple more sides and switch back I reckon. Tube rolling is fun but boy is it like a neverending multiverse of possibilities.
Back to top
 
 

Rega RP8 (w/ TNG-Spinner platter + isolation feet) -> Hegel V10 -> ZRock2 -> UFO25 -> Omega Junior 8 XRS

Lyngdorf TDAI 1120 -> Omega Compact Alnico Monitors

Woo Audio Wa7 Fireflies --> Hifiman Arya Organic | Sennheiser HD800
  IP Logged
Dominick
Seasoned Member
****


Still like that old
time Rock and Roll!!

Posts: 1318
Re: Siemens CCA / Lorenz PCC88 - good match for UFO25?
Reply #12 - 10/12/24 at 22:07:16
 
I run a matched pair of Tesla input tubes on my Torii MKIV 25th and my Zen SE84C+ 25th Monos and really love the sound.  I’ve rolled a few other input tubes overtime and for now the Tesla’s with the Rhodium pins are here to stay.  

Tube museum on eBay is a reputable vendor that I would check out for price comparisons.  

Dom
Back to top
 
 

Rasp. Pi 4 [Roon], Schiit Bifrost True Multibit DAC, ZBIT, ZROCK2, My Audio Cables Ultra Silver+, ZSB, CSP2+ 25th, DAG Cables, DHC1, Torii MKIV 25th /2 White Zen SE84C+ 25th mono’s, Rega P2 Turntable, White top ZP3, Velodyne Dual Firing Sub, ERR’s [Bubbinga Wood]
  IP Logged
Geno
Seasoned Member
****


Without music, life
would be a mistake.

Posts: 2152
Re: Siemens CCA / Lorenz PCC88 - good match for UFO25?
Reply #13 - 10/13/24 at 19:14:30
 
Guys,

Are the Tesla E88CCs yellow or white label? Or both (either)?
Back to top
 
 

(2)SE84UFO(Balanced Monoblocs) OR Sansui AU222
Cambrge Audio CXN(ModWright)
Crown XLS-1002
SL1210MK5(KAB Mods) Soundsm Aida MKll cart • Darlingt.Labs MP8b
Otari MX5050-Bll2 R2R
ZLC Power Cond
Lii Audio PT-10 OR F-12 OR Betsy Alnico 8"/ W-15 in Open Baffle
  IP Logged
CAJames
Seasoned Member
****


"I've run every
red light on memory
lane."

Posts: 2136
Re: Siemens CCA / Lorenz PCC88 - good match for UFO25?
Reply #14 - 10/13/24 at 19:42:10
 
Both. In general the gold pins have yellow labels and silver pins have white.
Back to top
 
 

[FOOBAR2000 | Jay's CDT2 MRK3] -> Denafrips Terminator 2 + Gaia
Sumiko Pearwood -> Mapleknoll Athena -> Luxman SUT -> Mapletree Phono 3E
STR-1002 -> Woo WA22 -> 2x UFO25s, balanced monos
Omega SAM , Hifiman Arya, Audeze LCD-XC
  IP Logged
CAJames
Seasoned Member
****


"I've run every
red light on memory
lane."

Posts: 2136
Re: Siemens CCA / Lorenz PCC88 - good match for UFO25?
Reply #15 - 10/30/24 at 19:25:28
 
So I went shopping and picked up a pair of Siemens labeled Telefunken PCC88s (TFK made tubes usually have a raised diamond mark on the base, "mit <>") for a pretty decent price (by 2024 standards). If\t took awhile for them to breakin, a long while actually, but now they are sounding really good. Exactly what you'd expect for the typical "German" sound: transparent, dynamic and linear. Some people might say they lack tube warmth, and to them I say to each their own.
Back to top
 
 

[FOOBAR2000 | Jay's CDT2 MRK3] -> Denafrips Terminator 2 + Gaia
Sumiko Pearwood -> Mapleknoll Athena -> Luxman SUT -> Mapletree Phono 3E
STR-1002 -> Woo WA22 -> 2x UFO25s, balanced monos
Omega SAM , Hifiman Arya, Audeze LCD-XC
  IP Logged
milkplus
Verified Member
**




Posts: 22
Re: Siemens CCA / Lorenz PCC88 - good match for UFO25?
Reply #16 - 11/03/24 at 06:35:30
 
Yes! I'm still happy as a pig in poop with mine. Glad to hear you're having the same experience.
Back to top
 
 

Rega RP8 (w/ TNG-Spinner platter + isolation feet) -> Hegel V10 -> ZRock2 -> UFO25 -> Omega Junior 8 XRS

Lyngdorf TDAI 1120 -> Omega Compact Alnico Monitors

Woo Audio Wa7 Fireflies --> Hifiman Arya Organic | Sennheiser HD800
  IP Logged
Pages: 1
Send Topic Print