Welcome, Guest. Please Login or Register
Decware Audio Forums
12/22/24 at 03:09:55 




Most recent 50 posts

Forums › EQUIPMENT FORUMS › SE84UFO25 ‹ Previous topic | Next topic ›
Pages: 1
Send Topic Print
UFO25 Voltage change (Read 147 times)
tcb-38
Verified Member
**




Posts: 39
UFO25 Voltage change
12/11/24 at 08:58:53  
Hi there, I'm in the market for a used UFO25 and would like to know if posible to switch voltage from 110V to 230V and how hard it is? I read a while ago the power transformer in UFO25B is a universal power transformer but can't see now any mention about this on product page nor in the manual. A schematic and with some guidance would help a lot. I'm in Europe. Best regards
Back to top
 
 
  IP Logged
CAJames
Seasoned Member
****


"I've run every
red light on memory
lane."

Posts: 2204
Re: UFO25 Voltage change
Reply #1 - 12/11/24 at 15:19:11  
I can't help you with rewiring your transformer, but in your situation I would consider an external step-down transformer. I've used them before with good results. My rule of thumb is the transformer ought to be rated at least 10x the power draw so for a UFO25 that would be 1000W. E.g.:

https://www.automationtechnologiesinc.com/products-page/variable-ac-transformer/...

Although I'm pretty sure you can find something similar on your side of the Atlantic.
Back to top
 
 
[FOOBAR2000 | Jay's CDT2 MRK3] -> Denafrips Terminator 2 + Gaia
Sumiko Pearwood -> Mapleknoll Athena -> Luxman SUT -> Mapletree Phono 3E
STR-1002 -> Woo WA22 -> 2x UFO25s, balanced monos
Omega SAM , Hifiman Arya, Audeze LCD-XC
  IP Logged
tcb-38
Verified Member
**




Posts: 39
Re: UFO25 Voltage change
Reply #2 - 12/11/24 at 16:08:04  
Thanks but don't want that route. I used them in the past for Japanese amplifier but not anymore.
Back to top
 
 
  IP Logged
Steve Deckert
Administrator
*****


If the 1st watt
sucks why continue?

Posts: 6346
Re: UFO25 Voltage change
Reply #3 - 12/11/24 at 19:49:33  


We recommend wiring it for 240V to extend tube life.
Back to top
 
 
WWW   IP Logged
tcb-38
Verified Member
**




Posts: 39
Re: UFO25 Voltage change
Reply #4 - 12/11/24 at 20:03:18  
Thank you Steve. Is it hatd to reach on transformer wires?
Back to top
 
 
  IP Logged
tcb-38
Verified Member
**




Posts: 39
Re: UFO25 Voltage change
Reply #5 - 12/18/24 at 09:47:29  
Any picture with location where should wired be done,please?
I mean is hard to reach?
Thanks
Back to top
 
 
  IP Logged
Pages: 1
Send Topic Print
Forums › EQUIPMENT FORUMS › SE84UFO25 ‹ Previous topic | Next topic ›







Forums » Powered by YaBB 2.2.2!
YaBB © 2000-2008. All Rights Reserved.


Source Forge