NOTES:

The next step is to install the only terminal strip in the entire amplifier, as shown above. It is important to grind or sand the layers of paint off the chassis underneath this terminal strip because this is the ground for the entire amplifier. This amp is built using a single point ground which is ideally located here in the center of the chassis.

This is no longer true in the SE84C and SE84CS revisions. In addition to the above terminal strip, there are 6 more. Two are located on the power transformer bolts (the ones closest to the front), two are located on the rectifier socket screws, and two are located on the input socket screws. There will be a picture of the different layouts at the end of this instruction.